Loading... Please wait...

MW-18-530 ULTIMA COMPLETE ELECTRONIC WIRING SYS/HARNESS -HARLEY TRI XS650 CHOPPER BOBBER

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
$179.90
SKU:
MW-18-530

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

ULTIMA "COMPLETE" ELECTRONIC WIRING SYSTEM / HARNESS

THE PROVEN "OLD FAITHFUL" DESIGN FOR EASY WIRING OF YOUR CUSTOM BIKE

The sealed main electronic module is 5" X 2" and has brackets to mount to any frame tube (approx 2-1/4" high off the tube)

Includes diagnostic LED's - a big help when wiring and troubleshooting - this is the one to get if you have room on your frame to mount

Also note picture of back side of main module - since it is fully "connector-ized", it can be removed easily without cutting wires. etc.

All flasher, relay & circuit interrupters are included in one small package that can be mounted in a wide variety of locations. This module and its plugs are waterproof and LED's are used to troubleshoot problems. Kit includes all wires, connectors, module & heat shrink tubing


 The circuit breaker protection circuits are internal to the box.

The diagnostic LED’s are used to locate shorts or overloads. Pinched or bare wires, faulty components
or too much current draw usually causes these. If an LED is on, turn off the bike, locate and correct the problem,
then turn the bike back on. The bike must be turned off to reset the protection circuit.

The unit will provide the starter wire/current to the starter button - and to the starter relay.  Buyer must provide the starter, the starter relay itself (usually part of the starter), and the big wire from the main starter bolt to the battery.

This unit provides +12V to power the ignition system (pin 6 white w/ black stripe to coil) , but does not include any engine control, management or timing/advance functionality


Controls self cancelling turn-signals, but you will need the indicator harness - sold separately in our ebay store

SEE THE COMPLETE INSTRUCTIONS ON HOW TO USE HERE:
http://www.ultimaproducts.com/18-530.pdf

This unit may or may not function correctly with LED type signal or LED type brake lights, because of their very low current draw.  In some cases resistors or load equalizers may help, but Midwest/Ultima cannot guarantee compatibility with all LED type bulbs

Note: Due to the risk of unseen internal damage we strongly prefer not to take returns on vital electrical parts, we will only consider a return on this item if it has not been powered-up and is as-new.  So please do your research on what will work best for your project BEFORE buying

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Copyright 2018 Panic Cycles. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the MW-18-530 ULTIMA COMPLETE ELECTRONIC WIRING SYS/HARNESS -HARLEY TRI XS650 CHOPPER BOBBER to your wish list.